Pearl Nano User Guide
Setup Panopto authentication for ad hoc events
d. On the
New API Client created
pop-up, record the Client ID and the Client Secret for future
reference, and then click
OK
. The new Pearl API Client appears in your list of API clients.
4. Add a URL redirect for the web-based Admin panel to the Pearl API Client. Do the following:
a. From the User Settings page under API Clients, click
Edit
beside the
Pearl API Client
that
you just created.
b. In the Allowed Redirect URLs field, enter
http://<
device_ip
>/admin/events
where
<
device_ip
>
is the IP address of Pearl Nano.
If Pearl Nano is configured for https, enter
https://
instead of
http://
.
c. In the URL Type field, select
Redirect URL
.
d. Click
Add URL
. The Admin panel URL redirect appears in the Allowed URL list.
5. Login to the Admin panel as
admin
, see
.
6. From the Configuration menu, click
CMS
. The Content management system configuration page
opens.
7. In the
Unscheduled ad hoc events
section, enter the Pearl Nano
API client id
that was generated
earlier, and then click
Apply
.
397
Summary of Contents for Pearl Nano
