EmoTouch 3 - Operating Instructions
61
Operation
3
Tap
and confirm the selection.
The time in hours that remains until the next servicing is displayed.
The following values are set for the service intervals by the factory:
Private use: 500 hours
Commercial use: 2500 hours
5.5.10 Heating period – auto stop
You can set a heating period for the sauna heater.
If the system is used in a private setting, the heating period is limited to
6 hours.
You can set the heating period as follows in commercial operation:
max. 12 h if the cabin is not being monitored.
max. 18 h if the cabin is being monitored.
unlimited heating period if the cabins are being monitored. Please
observe the local statutory intermission times.
If the cabin is operated in humidity mode, the drying program starts once
humidity mode is switched off. This program continues to run the sauna
heater for up to 30 minutes. The runtime of the drying program can be
changed in the basic setup.
See 6.1.10 Post-heating time,
Settings
Operation data
Service/Maintenance
01. June 2019
12:45:40
