EOS EmoTouch 3, Operating Instructions Manual

Page: 39 / 112

EmoTouch 3 - Operating Instructions 39
Operation
5.4.6 Switching ECO mode on/off
ECO mode can be activated during intermissions in operation to lower the
temperature without allowing the cabin to cool down completely. The
heating must be switched on to activate ECO mode.
It is not possible to activate ECO mode if HOT mode is on.
ECO mode can be activated as follows:

From the main menu.

Switching on ECO mode from the main
menu,

39

Using a push button that is available as an option (recommended).
ECO mode can be deactivated as follows:

It is switched off automatically once the period of time set in the service
menu expires. A runtime must be defined in the service settings for this.
See 6.1.13 Setting the ECO runtime,

97

From the main menu.

Switching off ECO mode from the main
menu,

41
This option allows you to cancel ECO mode early even if a runtime has
been pre-set.

Using a push button that is available as an option (recommended).

Switching on ECO mode from the main menu
1
Tap the image for the heater that is switched on.
2
: Select and confirm.

Example: Single installation
ECO mode is activated. The ECO icon flashes in the status bar.
HOT ECO
tap briefly
deactivate
Info
01. June 2019
18:45:40
0:45:40