90
Operating Instructions - EmoTouch 3
Service settings
EN
6.1.8 Fan post-cycle period
You can define the time in minutes for the fan post-cycle period after
humidity mode. This function should be used together with the post-heat-
ing time to dry the sauna faster.
Setting the post-cycle period for drying the cabin
1
Open the service settings.
See 6.1.1 Opening service settings,
2
Tap
and confirm the selection.
The post-cycle period is coupled with the post-heating time. The
runtime therefore appears in grey and cannot be changed.
We recommend that you retain this coupling and change the setting
for the post-heating time as needed.
Setting the post-heating time,
3
Tap
to remove the coupling.
The minutes value can be changed.
It appears in white if the post-heating time is coupled. It appears in
blue if the post-heating time is not coupled.
min
Setting
01. June 2019
fan running time
30
09:16:42
