EOS EmoTouch 3, Operating Instructions Manual

Page: 98 / 112

98 Operating Instructions - EmoTouch 3
Service settings
EN
3
Set the value with and , and then confirm by pressing .

A value between 0 and 240 minutes can be selected in 30 minute-
increments. The ECO function starts if ECO mode is activated in the
main menu or by pressing the push button that is available as an
option.
See 5.4.7 Switching on HOT mode,

41

If the setting is 0 minutes, you must manually switch the ECO runtime
on or off in the main menu or by pressing a button.
6.1.14 HOME function
You can control some functions for the sauna cabin with an external build-
ing management system. To do this, you must connect module
SBM GLT KNX or SBM GLT MOD. The module must be configured to the
type of building management system in use.
The following functions are supported:

Switch cabin on/off

Switch light on/off or dim

Set target temperature

Switch potential-free contact on/off

Display the actual temperature

Switch between Bio and Finnish mode (Bi-O sauna only)

Display actual humidity (Bi-O sauna only)

Set target humidity (Bi-O sauna only)
Setting
01. June 2019
ECO runtime
09:16:42
30
min