100
Operating Instructions - EmoTouch 3
Service settings
EN
6.2 Data transfer and updates
It is possible to connect a memory card (max. 32 GB) to the circuit board of
the control panel. It can remain permanently connected. The memory card
must be formatted with the FAT32 file system.
The memory card can be used to create backups and to transfer configura-
tion data and updates.
If the memory card is connected permanently, changes to the configura-
tion are written to the memory card as soon as the display switches to
cabin view or multi-cabin view.
The configuration data is written to the
CFG
folder.
Backups are saved daily in the
BUP
subfolder.
The files are encrypted:
T3_cfg.dat
includes the general EmoTouch 3 settings, e.g. language,
standby time and usage settings.
T3_CabinX_cfg.dat
includes cabin-specific settings, e.g. cabin type, tar-
get temperature and fan settings.
Restoring the configuration
If the factory settings are reset on the control panel and it is started with a
memory card that contains the saved configuration data, this data is auto-
matically read.
Therefore, the reset function is ineffective if a memory card has been
inserted because the configuration data on the memory card is automati-
cally read upon restart.
Importing a configuration is possible for version R2.10 or higher. If there
are different versions, settings that are not available are managed as fol-
lows:
From a newer version to an older version:
Settings that were not available in the older version are ignored.
From an older version to a newer version:
Settings that have been included in the newer version are assigned
default values.
Connecting the memory card
The front panel must be removed to insert the memory card. Use a removal
tool or a flathead screwdriver to remove the front panel.
