20
EN
Mounting location for control panel
Mounting the housing
The control panel is to be mounted outside of
the cabin. Preferably, it should be mounted on
the hinge-side of the door (not the opening
side). This prevents hot air from reaching the
control panel when the cabin is in use, which,
in the event of unfavourable ambient tempera-
tures in the ante-room, could cause condensa-
tion to form on/in the control panel. The follow-
ing distances are recommendations:
The control line from the relay box is connect-
ed to the control panel. The control line is fed
through the opening in the housing. Therefore,
it must be installed once the cut in the wall has
been made.
Tools required:
• Saw for cutting the wall (only when mount-
ing in the wall)
• Phillips screwdriver
• Removal tool to loosen the front panel (in-
cluded in the scope of delivery)
• Taught wire, as needed
• Wooden screws (included in the scope of
delivery):
4 screws for housing mounted in the wall
with a wall thickness of >30mm
3 screws for housing mounted on the wall
Necessary steps:
• Remove the display panel from the hous-
ing
• Mount the housing in the wall, or
• Mount the housing on the wall
ca. 340 mm
120 mm
117 mm
ca. 340 mm
ey
e heigh
t
ey
e heigh
t
Mounting location
Gaps
Summary of Contents for Emotec D
Page 68: ...68 DE...
