47
EN
Operation and program settings (main functions)
Sauna on / off
Press the
button on the control panel for approx. 3 seconds to switch the sauna on. Count-
down runs
1
2
3
. The display will show the active heating state (see previous page). The
cabin light will be also switched on.
To switch the sauna off press the
button shortly. For EmoTec H models in humid mode the
“sauna dry” program will switch on for 30 min. after the main operation. This time may be reduced
or the program may be disabled in setup. After this program the sauna will switch off completely.
You can stop the “sauna dry” program at any time - just press the
button again shortly.
Light on / off
Press the light button on the control panel to switch the cabin light on or off. The light will switch
on automatically if the heater is switched on, after the heater switches off the light will stay on for
30 minutes. Factory setting cleaning light on, deactivate cleaning light with code 9495.
Sauna operation mode - dry sauna or humid (Bi-O) sauna (only EmoTec H)
Select the sauna mode symbol
and press on the jog-dial to enter the selection menu:
select
for the dry Finnish sauna or
for the humid (Bi-O) sauna mode.
If the humid mode has been selected, the humidity symbol will automatically appear in the main
menu. This option is only available in EmoTec H models.
Temperature
Select and press the temperature symbol
in
the main menu. A submenu will open and show
the current value. Set the new temperature with
the jog-dial. Press the jog-dial to confirm and
exit. This setting can be also made during active
heating.
Humidity (only EmoTec H)
Select and press the humidity symbol
in the main menu. A submenu will open and show the
last stored humidity value. Set the desired humidity with the jog-dial. Press the jog-dial shortly to
confirm the setting and exit. This setting can be also made during active heating (in humid mode).
With a connected humidity sensor (% sign appears inside cloud) the relative air humidity will be
controlled. Without humidity sensor the humidity will be controlled in proportional to time way.
“30%” then means 30% of the total heating time. The display will show the
symbol.
Temperature
20:51
Setting for
operation with
vaporizer (humid)
55°
Temperature
20:51
Setting for
operation with
vaporizer (humid)
55°
Summary of Contents for Emotec D
Page 68: ...68 DE...
