24
EN
20 cm
35 cm
> 2 x 2 m
19 cm
< 2 x 2 m
The main sensor (heater sensor) must be in-
stalled where expected temperatures are the
highest, meaning directly above the sauna
heater. Proper installation is necessary to en-
sure compliance with the temperature limits
and to ensure that there is only a very slight
fluctuation in temperature in the areas of the
sauna cabin where there are reclining options.
The main sensor is installed in observance of
the following distances from the cabin wall, de-
pending on the cabin size.
Guidelines for sensor installation
Sensor
CAUTION
Fire hazard from overheating
Requirements that apply to installing the main sensor may exist for certain sauna heaters.
• Before installation, ensure that there are no heater-specific requirements that apply to install-
ing the sensor.
Mounting position: above sauna heater
Cabin smaller than 2 x2 m
Cabin larger than 2 x2 m
Summary of Contents for Emotec D
Page 68: ...68 DE...
