45
EN
Symbol description - main navigation menu
Operation principle with a jog-dial knob
Rotate the jog-dial knob to the left or right, in order to reach a function. Press shortly on the jog-di-
al knob to open this function. Rotate the jog-dial knob to change the value (changed value turns
from white to green). Press the jog-dial knob shortly to save (confirm) the setting and exit, the
control panel will then return to the previous (upper) menu.
Operation type (only EmoTec H)
Selection between dry and humid mode (the
vaporizer must be connected and enabled).
Auto-Start
Pre-set timer for later automatic switching on
of the sauna up to 24 h in advance.
Timer
Setting for automatic switching on via calen-
der. A single event switching or regular week
timer switching is possible.
Potential-free contact
Switch for the potential-free contact (PFC).
Back
Return to the upper menu.
Extended settings
Submenu for further settings. Like e.g. lan-
guage, time, date, screensaver, child lock,
heating time, etc.
Light
Setting of the desired light intensity and light
switching (light dimming 0 - 100%).
Temperature
Setting of the target temperature in the sau-
na cabin.
Humidity
Setting of the target humidity value in humid
operation mode. % sign indicates connected
humidity sensor (rel. air humidity control).
Finnish sauna mode
Selection for operation in dry Finnish mode
(submenu of the operation type).
Humid sauna mode (Bi-O)
Selection for operation in humid mode.
(submenu of the operation type).
Hint:
If you do not operate the jog-dial for more than 20 seconds the control unit will return to the
start screen. All not confirmed settings will be lost in this case.
Thanks to the integrated battery (CD2032 type, in control panel), all settings will be stored in the
memory and will be retained even in the case of a very long time power loss.
New extension modules and optional equipment will be normally automatically detected and
configured. Upon restart the control panel will show the corresponding new symbols in the
menu navigation.
HOT-Start
(only in Finnish sauna mode)
HOT-function cannot stopped once it has
been started.
Icon only available when the heater is on.
ECO-Start / ECO-Stop
ECO-function can be started and stopped.
Icon only available when the heater is on.
Notice: Additional symbols for settings of the optional extension modules may be shown in
the main menu.
Summary of Contents for Emotec D
Page 68: ...68 DE...
