60
EN
HOT-auto interval time
You can start the HOT mode automatically at specific time intervals. In this menu the interval for
this automatic switch-on can be set.
However, the HOT heat-up phase starts effectively a little earlier, before the set time according to
the set duration. Thereby the sauna stones reach the ideal temperature at the desired start time.
If the system started at a time when the preselected time period of the heating phase should have
already started, the next step of the HOT interval is executed first.
Example:
When setting the start time:
8:00
and duration:
20 minutes
, the HOT heat-up phase be-
gins at 7:40, with a duration of 15 minutes - at 7:45, with a duration of 10 minutes - at 7:50.
• Setting range: 30 to 480 minutes
• Increment: 30 minutes
• Factory default setting: 60 minutes
HOT-auto start time
• In this menu, the start time for the HOT-auto or for the first water splash can be set
• Setting range: 0:00 Uhr to 23:59 Uhr, --:-- corresponds to HOT-auto deactivated
• Factory default setting: --:--
HOT-auto switch-off time
• In this menu, the switch-off time for the HOT-auto can be set
• Setting range: 0:00 Uhr to 23:59 Uhr, --:-- corresponds to HOT-auto switches off with sauna
• Factory default setting: --:--
ECO mode
The ECO mode runtime can be set in this menu. Once the pre-set time runs out the control unit
returns to the normal temperature range. A vaporizer (if installed) will be off when ECO is active.
• Setting range: 0 to 240 minutes. 0 means the ECO mode has to be deactivated manually.
• Increment: 30 minutes
• Factory default setting: 0 (only manual deactivation of the ECO mode)
• Notice: by „0“ setting the ECO mode can be only deactivated manually, but will stop after 18
hours of heating.
HOME (remote control via building management systems)
The control unit supports the possibility of remote control via building management systems run-
ning on KNX or Modbus communication protocols.
You will need an optionally available communication module to use this feature (SBM-GLT-KNX
item 947078 or SBM-GLT-Mod item 947077). This module connects to the sauna control unit with
the sauna bus connection cable.
Notice:
During the initial setup of the sauna control unit it should be confirmed, that the sauna
cabin is compliant with the legal safety regulations. Otherwise the remote control will be locked.
Summary of Contents for Emotec D
Page 68: ...68 DE...
