41
EN
Setup during commissioning or af-
ter a reset
The settings must be redefined upon commissioning and after a complete system reset. The pro-
gram guides you through the required steps.
If you do not operate the control panel for 15 seconds during setup, it will return to the first step.
Already made setting will be then lost.
Defining the basic settings
1. Set the language and confirm.
2. Set the time and confirm.
3. Set the date and confirm.
4. Specify the type of use and confirm:
a)
Private use
b)
Commercial use
Notice: Special safety regulations apply to the commercial setting. See chapter „Operator In-
struction“.
5. Confirm availability of a safety system.
Notice: If you do not confirm the availability of a safety system, the functions of remote
switching, remote control and of the timer will be disabled.
6. Select and confirm the sauna heater type.
a)
dry sauna heater without vaporizer (or with disabled vaporizer)
b)
sauna heater with vaporizer (Bi-O sauna heater).
Thes setup will also guide to the settings of the optional extension modules if they are connected,
e.g. coloure light module, sound module, BMS control module.
The setup is then complete. The control panel will display the stand-by interface (start screen).
20:51
Summary of Contents for Emotec D
Page 68: ...68 DE...
