manualshive.com logo in svg

Enterasys SmartSwitch 6000, User Manual

The Enterasys SmartSwitch 6000 brings advanced networking capabilities to your business. Easily configure and manage network settings with the help of the comprehensive User Manual. Download it for free from manualshive.com and unleash the full potential of your SmartSwitch 6000.

Share
Download
background image

Viewing Device Information

2-31

The Device View

Three informational fields appear in the upper portion of the window:

Description

Displays the interface description for the currently selected interface (e.g., Enterasys Enet 
Port, Enterasys Fast Enet Port, FDDI, ATM, or Enterasys Backplane Port).

Address

Displays the MAC (physical) address of the selected interface.

Type

Displays the interface type of the selected port: ethernet-csmacd, fddi, or atm.

The lower portion of the window provides the following transmit and receive statistics; 
note that the first four statistics are also graphically displayed in the pie charts. 

Unicast

Displays the number of packets transmitted to or received from this interface that had a 
single, unique destination address. These statistics are displayed in the pie chart, 
color-coded green.

Non-Unicast

Displays the number of packets transmitted to or received from this interface that had a 
destination address that is recognized by more than one device on the network segment. 
The multicast field includes a count of broadcast packets — those that are recognized by 
all devices on a segment. These statistics are displayed in the pie chart, color-coded dark 
blue.

Discarded

Displays the number of packets which were discarded even though they contained no 
errors that would prevent transmission. Good packets are typically discarded to free up 
buffer space when the network becomes very busy; if this is occurring routinely, it usually 
means that network traffic is overwhelming the device. To solve this problem, you may 
need to re-configure your bridging parameters, or perhaps re-configure your network to 
add additional bridges or switches. Consult the Enterasys Network Troubleshooting 
Guide for more information.

These statistics are displayed in the pie chart, color-coded magenta.

Error

Displays the number of packets received or transmitted that contained errors. These 
statistics are displayed in the pie chart, color-coded red.

TIP

You can also access this information via the I/F Statistics option available on the 
individual port menus.

Summary of Contents for SmartSwitch 6000








































































































































































































































Reviews:

No comments

Related manuals for SmartSwitch 6000

Paradyne 3163 Quick Reference preview
3163
Brand: Paradyne Pages: 16
Qlogic SANbox 6142 Supplementary Manual preview
SANbox 6142
Brand: Qlogic Pages: 2
Qlogic iSR6142 User Manual preview
iSR6142
Brand: Qlogic Pages: 172
F5 i5000 Series Platform Manual preview
i5000 Series
Brand: F5 Pages: 72
AXIOMTEK tBOX330-870-FL Series Quick Installation Manual preview
tBOX330-870-FL Series
Brand: AXIOMTEK Pages: 2
Funkwerk TR 200 aw/ bw Operating Instructions preview
TR 200 aw/ bw
Brand: Funkwerk Pages: 2
QuickLink QL-CXS Installation Manual preview
QL-CXS
Brand: QuickLink Pages: 8
Abocom WR5502 User Manual preview
WR5502
Brand: Abocom Pages: 63
B&B Electronics 4 Channel Input Buffer Board SDAIBB Product Manual preview
4 Channel Input Buffer Board SDAIBB
Brand: B&B Electronics Pages: 22
ZALMAN ZM-2HC2 User Manual preview
ZM-2HC2
Brand: ZALMAN Pages: 8
MiWire SeaWire Pro User Manual preview
SeaWire Pro
Brand: MiWire Pages: 24
Aqua Computer Aquaduct 240 eco Operating And Assembly Manual preview
Aquaduct 240 eco
Brand: Aqua Computer Pages: 20
Perle IOLAN MDC User Manual preview
IOLAN MDC
Brand: Perle Pages: 491
Ubiquiti airMAX NanoBridge M NBM3 Quick Start Manual preview
airMAX NanoBridge M NBM3
Brand: Ubiquiti Pages: 24
Tripp Lite SmartRack SR25UBEXP Specifications preview
SmartRack SR25UBEXP
Brand: Tripp Lite Pages: 4
EZCast Pro Dongle II D10 Repair Manual preview
Dongle II D10
Brand: EZCast Pro Pages: 4
ekwb EK-FC R9-295X2 Installation And Mounting Manual preview
EK-FC R9-295X2
Brand: ekwb Pages: 2
UNICOM DynaGST/2402G GEP-33224T-1 User Manual preview
DynaGST/2402G GEP-33224T-1
Brand: UNICOM Pages: 17

Brands by name

Popular brands

Load more brands