Enterasys SmartSwitch 6000, User Manual

Page: 92 / 231

Managing the Module 2-73
The Device View
To set up your 802.1Q port-based VLANs using NetSight Element Manager, you must
first define the desired VLANs using the VLAN Config window (
Figure 2-25 ), which
allows you to assign VLAN IDs and optional VLAN names, and enable or disable
VLANs.
After your VLANs are defined, you may configure the ingress and egress lists for each
port using the VLAN Port Config window (
Figure 2-26 ) and the VLAN Egress Port
Config window ( Figure 2-27 ), respectively.
Setting VLAN Parameters and Operational Modes
802.1Q VLANs are defined using the VLAN Config window, which is accessed from the
Device menu in your switch’s Device View. To launch the window:
1. Click on Device in the Device View menu bar to display the Device menu.
2. Drag down to 802.1Q VLAN, then right to select 802.1Q VLAN Config. The
VLAN Config window,
Figure 2-25 , will appear.
Figure 2-25. The VLAN Config Window
The Configured VLANS list box and fields allow you to view, create, modify, delete,
enable, and disable 802.1Q port-based VLANs. The list box displays the following
information about your defined VLANs: