manualshive.com logo in svg

Enterasys SmartSwitch 6000, User Manual

The Enterasys SmartSwitch 6000 brings advanced networking capabilities to your business. Easily configure and manage network settings with the help of the comprehensive User Manual. Download it for free from manualshive.com and unleash the full potential of your SmartSwitch 6000.

Share
Download
background image

The Device View

2-42

Managing the Module

During Auto-Negotiation, each of the link partners will advertise all selected modes in 
descending bandwidth order: 100Base-TX Full Duplex, 100Base-TX, 10Base-T Full 
Duplex, and 10Base-T. Of the selected abilities, the highest mode mutually available will 
automatically be used. If there is no mode mutually advertised, no link will be achieved.

If you have selected a specific operational mode for your 100Base-TX port, the 
Advertised Abilities do not apply; the selected Advertised Abilities also do not restrict the 
local node’s ability to set up a link with a partner who is not currently Auto-Negotiating.

Remote Capabilities

When the local node is set to Auto-Negotiation, this field will display the advertised 
abilities of the remote link — even if the remote link is not currently set to auto-negotiate. 
Possible values for this field are:

•

100Base-TX Full Duplex

•

100Base-TX

•

10Base-T Full Duplex

•

10Base-T

•

Link Partner does not support Auto-Negotiation — Auto-Negotiation is either not 
supported by or is not currently selected on the remote port.

•

Unknown — the link partner’s capabilities could not be determined. 

When the local node is not set to Auto-Negotiation, this field will be grayed out, even if 
the link partner is set to Auto-Negotiation and is advertising abilities.

Setting the Desired Operational Mode

For any 100Base-TX port, you can specifically choose any one of the four available 
operational modes, or you can select Auto-Negotiation mode, which allows the port to 
negotiate with its link partner to find the highest mutually available bandwidth. If you 
select Auto-Negotiation mode, you must also choose which of the port’s bandwidth 
capabilities you wish to advertise to the link partner.

NOTE

Auto-Negotiation is not currently supported for 100Base-FX ports.

NOTE

If both link partners are set to Auto-Negotiation, but there is no mutually-advertised 
operational mode, no link will be achieved, and both nodes may display the message 
“Link Partner does not support Auto-Negotiation.” To resolve this situation, be sure both 
link partners advertise all their abilities, or be sure they advertise at least one 
mutually-available mode.

Summary of Contents for SmartSwitch 6000








































































































































































































































Reviews:

No comments

Related manuals for SmartSwitch 6000

IEI Technology HPE-4S1 Quick Installation Manual preview
HPE-4S1
Brand: IEI Technology Pages: 3
VMIC VMICPCI-7755 Product Manual preview
VMICPCI-7755
Brand: VMIC Pages: 126
Hama FireWire Combo Instructions Manual preview
FireWire Combo
Brand: Hama Pages: 8
AXIOMTEK AIE900-XNX Series User Manual preview
AIE900-XNX Series
Brand: AXIOMTEK Pages: 53
D3 DesignCore RVP-TDA3 Series Quick Start Manual preview
DesignCore RVP-TDA3 Series
Brand: D3 Pages: 34
Intel F-Tile SDI II Intel Agilex User Manual preview
F-Tile SDI II Intel Agilex
Brand: Intel Pages: 39
Magma ExpressBox2 EB2 User Manual preview
ExpressBox2 EB2
Brand: Magma Pages: 74
Xenteq SR 200-12 User Manual preview
SR 200-12
Brand: Xenteq Pages: 16
Maxtor DiamondMax 8S Specification Sheet preview
DiamondMax 8S
Brand: Maxtor Pages: 2
Datum bc635VME Operation And Technical Manual preview
bc635VME
Brand: Datum Pages: 49
Lantronix WP2002000-01 User Manual preview
WP2002000-01
Brand: Lantronix Pages: 75
Ricoh Network Scanning Unit A Operating Instructions Manual preview
Network Scanning Unit A
Brand: Ricoh Pages: 206
Cooler Master MCY-C3P1-KWNN Manual preview
MCY-C3P1-KWNN
Brand: Cooler Master Pages: 4
Lanpro LP-SW811 User Manual preview
LP-SW811
Brand: Lanpro Pages: 6
Mobile Devices MUNIC V6+ Installation Manual preview
MUNIC V6+
Brand: Mobile Devices Pages: 12
SeaLevel 2423 User Manual preview
2423
Brand: SeaLevel Pages: 25
Billion BiPAC 7820NZ User Manual preview
BiPAC 7820NZ
Brand: Billion Pages: 100
EZCast M2 User Manual preview
M2
Brand: EZCast Pages: 27

Brands by name

Popular brands

Load more brands