manualshive.com logo in svg

Enterasys SmartSwitch 6000, User Manual

The Enterasys SmartSwitch 6000 brings advanced networking capabilities to your business. Easily configure and manage network settings with the help of the comprehensive User Manual. Download it for free from manualshive.com and unleash the full potential of your SmartSwitch 6000.

Share
Download
background image

Viewing Device Information

2-13

The Device View

•

Bridge Status opens a window that provides an overview of bridging information for 
each port, and allows you to access all other bridge-related options. Refer to the 
Bridging chapter in the Element Manager Tools Guide for more information.

•

Broadcast Suppression allows you to set a threshold on the number of broadcast 
packets issued from each port on the SmartSwitch 6000 or Matrix E7 module when it 
is operating in traditional switch (bridge) mode.

•

HSIM W87 Config (T1) allows you to configure T1 connections for an installed 
HSIM-W87; see Chapter 8, 

HSIM-W87 Configuration

, for details.

•

IP Priority Config allows you to configure priority transmission for up to 16 IP 
addresses for an installed HSIM-W87; see Chapter 8, 

HSIM-W87 Configuration

, for 

details.

•

Performance Graph appears if there are between one and eight bridge ports, they are 
all running at the same speed, and the speed is less than 100 Mb/s. The bridge 
performance graph visually displays the combined performance of all bridging 
interfaces installed in the SmartSwitch 6000 or Matrix E7 module. Refer to the 
Bridging chapter in the Element Manager Tools Guide for more information.

•

Spanning Tree allows you to set bridge parameters when it is operating using the 
Spanning Tree Algorithm (STA) — the method that bridges use to decide the 
controlling (root) bridge when two or more bridges are in parallel. Refer to the 
Bridging chapter in the Element Manager Tools Guide for more information.

•

SmartTrunk invokes the SmartTrunk Configuration and Status Screen, which enables 
you to group interfaces logically to achieve greater bandwidth between devices, if both 
devices support the SmartTrunk feature. There is no limit to the number of ports that 
can be included in a single “trunk,” nor is there a limit to the number of trunked 
“instances” that can be supported. Refer to the Bridging chapter in the Element 
Manager Tools Guide for more information.

•

Filtering Database lets you see and configure the contents of the 802.1d bridge Static 
and Filtering Databases. Refer to the Bridging chapter in the Element Manager Tools 
Guide for more information.

•

Duplex Modes allows you to set Duplex Mode operation for standard Ethernet 
interfaces.

•

Enable/Disable Bridge enables or disables bridging across every interface installed in 
the SmartSwitch 6000 or Matrix E7 module.

The Port Menus

Each port menu offers the following selections:

•

Description displays a text description of the selected port. See 

Viewing Hardware 

Types

, on 

page 2-25

, for details.

•

Performance Graph appears if the port’s speed is less than 100 mb/s. The resulting 
bridge port performance windows visually display bridging performance at the 
selected interface. Refer to the Bridging chapter in the Element Manager Tools Guide 
for more information.

Summary of Contents for SmartSwitch 6000








































































































































































































































Reviews:

No comments

Related manuals for SmartSwitch 6000

3Com IntelliJack NJ200 Datasheet preview
IntelliJack NJ200
Brand: 3Com Pages: 4
Acconeer A111 User Manual preview
A111
Brand: Acconeer Pages: 32
Patton electronics 1090 Service Manual preview
1090
Brand: Patton electronics Pages: 8
H3C SR8800 IM-FW-II Command Reference Manual preview
SR8800 IM-FW-II
Brand: H3C Pages: 107
3Com MSR 50 Series Safety Information Manual preview
MSR 50 Series
Brand: 3Com Pages: 12
H3C S9500 Series Operating Manual preview
S9500 Series
Brand: H3C Pages: 16
H3C H3C S3600 Series Datasheet preview
H3C S3600 Series
Brand: H3C Pages: 10
H3C MSR 930 Installation Manual preview
MSR 930
Brand: H3C Pages: 42
H3C MSR 800 Installation, Quick Start preview
MSR 800
Brand: H3C Pages: 2
H3C H3C S7500E Series Instruction Manual preview
H3C S7500E Series
Brand: H3C Pages: 34
H3C MSR Series Manual preview
MSR Series
Brand: H3C Pages: 33
H3C CR16000-F Configuration Manual preview
CR16000-F
Brand: H3C Pages: 14
H3C MSR 3600 Hardware Information And Specifications preview
MSR 3600
Brand: H3C Pages: 56
H3C H3C S7500E Series Configuration Manual preview
H3C S7500E Series
Brand: H3C Pages: 112
H3C S3100-52P Command Manual preview
S3100-52P
Brand: H3C Pages: 15
H3C SR8800 IM-FW-II Manual preview
SR8800 IM-FW-II
Brand: H3C Pages: 5
H3C H3C S7500E Series Installation Manual preview
H3C S7500E Series
Brand: H3C Pages: 50
H3C MSR810 Manual preview
MSR810
Brand: H3C Pages: 37

Brands by name

Popular brands

Load more brands