Enterasys SecureStack C2, Configuration Manual

Page: 579 / 607

clear maclock agefirstarrival
SecureStack C2 Configuration Guide 18-55
clear maclock agefirstarrival
Use this command to reset first arrival aging on one or more ports to its default state of disabled.
Syntax
clear maclock agefirstarrival port-string
Parameters
Defaults
None.
Mode
Switch mode, read ‐ write.
Example
This example disables first arrival aging on port
ge
.1.1.
C2(su)-> clear maclock agefirstarrival ge.1.1 enable
set maclock move
Use this command to move all current first arrival MACs to static entries.
Syntax
set maclock move port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
If there are more first arrival MACs than the allowed maximum static MACs, then only the latest
first arrival MACs will be moved to static entries. For example, if you set the maximum number of
static MACs to 2 with the set maclock static command, and then executed the set maclock move
command, even though there were five MACs in the first arrival table, only the two most recent
MAC entries would be moved to static entries.
port ‐ string Specifies the port(s) on which to disable first arrival aging. For a
detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 5 ‐ 2.
port ‐ string Specifies the port on which MAC will be moved from first arrival MACs
to static entries. For a detailed description of possible port ‐ string values,
refer to “ Port String Syntax Used in the CLI ” on page 5 ‐ 2.