Enterasys SecureStack C2, Configuration Manual

Page: 394 / 607

Configuring Node Aliases
12-32 Logging and Network Management
Configuring Node Aliases
Purpose
To review, disable, and re ‐ enable node (port) alias functionality, which determines what network
protocols are running on one or more ports.
Commands
show nodealias config
Use this command to display node alias configuration settings on one or more ports.
Syntax
show nodealias config [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, node alias configurations will be displayed for all ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display node alias configuration settings for ports
ge
.2.1 through 9:
C2(rw)->show nodealias config ge.2.1-9
Port Number Max Entries Used Entries Status
----------- ----------- ------------ ------
ge.2.1 16 0 Enable
ge.2.2 47 0 Enable
ge.2.3 47 2 Enable
ge.2.4 47 0 Enable
ge.2.5 47 0 Enable
ge.2.6 47 2 Enable
ge.2.7 47 0 Enable
ge.2.8 47 0 Enable
ge.2.9 4000 1 Enable
Table 12 ‐ 7 provides an explanation of the command output.
For information about... Refer to page...
show nodealias config 12-32
set nodealias 12-33
clear nodealias config 12-34
port ‐ string (Optional) Displays node alias configuration settings for specific port(s).