Enterasys SecureStack C2, Configuration Manual

Page: 263 / 607

show spantree adminedge
SecureStack C2 Configuration Guide 7-37
Parameters
Defaults
If sid is not specified, admin path cost will be reset for Spanning Tree 0.
Mode
Switch command, read ‐ write.
Example
This example shows how to reset the admin path cost to 0 for
ge
.3.2 on SID 1:
C2(su)->clear spantree adminpathcost ge.3.2 sid 1
show spantree adminedge
Use this command to display the edge port administrative status for a port.
Syntax
show spantree adminedge [port port-string ]
Parameters
Defaults
If port ‐ string is not specified edge port administrative status will be displayed for all Spanning
Tree ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display the edge port status for
ge
.3.2:
C2(su)->show spantree adminedge port ge.3.2
Port ge.3.2 has a Port Admin Edge of Edge-Port
set spantree adminedge
Use this command to set the edge port administrative status on a Spanning Tree port.
port ‐ string Specifies the port(s) for which to reset admin path cost. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax
Used in the CLI ” on page 5 ‐ 2.
sid sid (Optional) Resets the admin path cost for specific Spanning Tree(s).
Valid values are 0 ‐ 4094 . If not specified, SID 0 is assumed.
port ‐ string (Optional) Displays edge port administrative status for specific
port(s). For a detailed description of possible port ‐ string values,
refer to “ Port String Syntax Used in the CLI ” on page 5 ‐ 2.