Enterasys SecureStack C2, Configuration Manual

Page: 367 / 607

set logging default
SecureStack C2 Configuration Guide 12-5
set logging default
Use this command to set logging default values.
Syntax
set logging default {[ facility facility] [ severity severity ] port port] }
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the Syslog default facility name to local2 and the severity level to 4
(error logging):
C2(su)->set logging default facility local2 severity 4
clear logging default
Use this command to reset logging default values.
Syntax
clear logging default {[ facility ] [ severity ] [ port ]}
facility facility Specifies the default facility name. Valid values are: local0 to local7.
severity severity Specifies the default logging severity level. Valid values and
corresponding levels are:
1 — emergencies (system is unusable)
2 — alerts (immediate action required)
3 — critical conditions
4 — error conditions
5 — warning conditions
6 — notifications (significant conditions)
7 — informational messages
8 — debugging messages
port port Specifies the default UDP port the client uses to send to the server.