Enterasys SecureStack C2, Configuration Manual

Page: 324 / 607

set cos port-config
9-22 Policy Classification Configuration
Mode
Switch command, read ‐ only.
Example
This example shows how to show all CoS settings:
C2(su)->show cos settings
CoS Index Priority ToS IRL
--------- ---------- ------- -----
0 0 * *
1 1 * *
2 2 * *
3 3 * *
4 4 * *
5 5 * *
6 6 * *
7 7 * *
set cos port-config
Use this command to create a port group for inbound rate limiting and add or remove ports from
the group.
Syntax
set cos port-config irl group-type-index [ name name ] [ ports port-list ] [ append ] |
[ clear ]
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
irl Specifies that this is an inbound rate limiting (IRL) port group.
group ‐ type ‐ index Specifies an inbound rate limiting port group/type index. Valid entries
are in the form of group#.port ‐ type .
Valid values for group# can range from 0 to 7. Valid values for port ‐ type
can range from 0 to 1, although only port type 0 is currently supported.
For example, port group 3 would be specified as 3.0 .
name name (Optional) User defined name for the group .
ports port ‐ list (Optional) Ports assigned to the group . All ports must be of the same port
type (Fast Ethernet, Gigabit Ethernet).
append (Optional) Append (add) the ports to the ports that are already in the
group .
clear (Optional) Clear the given ports from those assigned to the group .