Enterasys SecureStack C2, Configuration Manual

Page: 316 / 607

Assigning Ports to Policy Profiles
9-14 Policy Classification Configuration
Mode
Switch command, read ‐ write.
Example
This example shows how to remove all administrative and policy index rules:
C2(su)->clear policy all-rules
Assigning Ports to Policy Profiles
Purpose
To assign and unassign ports to policy profiles.
Commands
set policy port
Use this command to assign ports to a policy profile.
Syntax
set policy port port-string profile-index
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Note: The C2 switch supports up to eight user policies per port.
For information about... Refer to page...
set policy port 9-14
clear policy port 9-15
port ‐ string Specifies the port(s) to add to the policy profile. For a detailed description
of possible port ‐ string values, refer to “ Port String Syntax Used in the CLI ”
on page 5 ‐ 2.
profile ‐ index Specifies the ID of the policy profile (role) to which the port(s) will be
added. This value must match the profile ‐ index value assigned using the
set policy profile command (“ set policy profile ” on page 9 ‐ 3) in order for
a policy profile to be active on the specified port.