Enterasys SecureStack C2, Configuration Manual

Page: 557 / 607

set multiauth precedence
SecureStack C2 Configuration Guide 18-33
Syntax
clear multiauth mode
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to clear the system authentication mode:
C2(rw)->clear multiauth mode
set multiauth precedence
Use this command to set the system’s multiple authentication administrative precedence.
Syntax
set multiauth precedence {[ dot1x ] [ mac ] [ pwa ]}
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
When a user is successfully authenticated by more than one method at the same time, the
precedence of the authentication methods will determine which RADIUS ‐ returned filter ID will be
processed and result in an applied traffic policy profile.
Example
This example shows how to set precedence for MAC authentication:
C2(rw)->set multiauth precedence mac dot1x
dot1x Sets precedence for 802.1X authentication.
mac Sets precedence for MAC authentication.
pwa Sets precedence for port web authentication