Enterasys SecureStack C2, Configuration Manual

Page: 162 / 607

set linkflap portstate
5-24 Port Configuration
set linkflap portstate
Use this command to enable or disable link flap monitoring on one or more ports.
Syntax
set linkflap portstate { disable | enable } [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, all ports are enabled or disabled.
Mode
Switch command, read ‐ write.
Example
This example shows how to enable the link trap monitoring on all ports.
C2(rw)->set linkflap portstate enable
set linkflap interval
Use this command to set the time interval (in seconds) for accumulating link down transitions.
Syntax
set linkflap interval port-string interval-value
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the link flap interval on port
ge
.1.4 to 1000 seconds.
C2(rw)->set linkflap interval ge.1.4 1000
disable | enable Disables or enables the link flap detection function.
port ‐ string (Optional) Specifies the port or ports on which to disable or enable
monitoring.
port ‐ string Specifies the port(s) on which to set the link flap interval.
interval ‐ value Specifies an interval in seconds. A value of 0 will set the interval to
forever.