Enertech CTC EcoLogic Family series, Installation And Maintenance Manual, Page: 57 / 128

57
CTC EcoLogic Pro/Family
For the property owner
The functions in remote control.
HP tariff
When electricity suppliers use a differentiated tariff, you have the opportunity
to block the heat pump when the electricity tariff is high.
NB: If both the heat pump and the immersion heater are blocked, the
building may be without heating for a long time. It is therefore recommended
that you only block the electric heater with the tariff.
Electricity tariff*.
When electricity suppliers use a differentiated tariff, you have the opportunity
to block the immersion heater(s) when the electricity tariff is high.
NB: When combined with the air heat pump, there is a risk that the building
will be without heating for a long time.
Night reduction
Night reduction means that you reduce the temperature indoors during
scheduled periods, for example at night or when you are at work.
Ripple control
Disconnecting the compressor and immersion heater during a certain period
which is dei ned by the electricity supplier (special equipment).
Ripple control is a device which an electricity supplier can i t with the aim of
disconnecting high current draw equipment for a short period of time. The
compressor and electrical power are blocked when ripple control is active.
Additional Domestic Hot Water
Select this option if you want to activate the Extra DHW function. When
the function is activated (by setting the number of hours) the heat pump
immediately starts to produce extra DHW. You also have the option to
schedule hot water production for certain times using the
Weekly program
function (recommended).
The temperature is also determined by how the setting has been performed
in the Installer/Settings/Upper tank/Extra DHW stop temp ºC menu
or
Installer/Settings/DHW tank/Extra DHW stop temp ºC.
NB: Enertech AB is NOT responsible for the required heat being produced if the remote control has blocked the heating over a long period.