Enertech CTC EcoLogic Family series, Installation And Maintenance Manual, Page: 31 / 128

31
CTC EcoLogic Pro/Family
For the property owner
4.4.2.1 Heat pump status
This menu shows the current status of dei ned heat
pumps. Heat pumps A1–A10 (EcoAir, EcoAirM or
EcoPart) can have the following statuses:
Blocked in menu
The heat pump’s compressor is not permitted in the
Installer/Settings/Heat pump menu.
Communication error HP
EcoLogic cannot communicate with the heat pump.
On, DHW
The heat pump’s compressor heats the hot water tank.
Off, start delay
The heat pump’s compressor is off and is prevented
from starting due to the start delay.
Off, ready to start
The heat pump’s compressor is off and start ready.
Flow on
The heat pump and fan are started before the
compressor. Shown for EcoAir heat pumps.
On, heating
The heat pump’s compressor heats the heating circuit .
Defrosting
The heat pump defrosts. Shown for EcoAir heat pumps.
Blocked
The heat pump has stopped due to a temperature or
pressure that has reached its maximum value.
Off, alarm
The compressor is off and gives an alarm signal.
Function test
The compressor is function tested.
The illustration above shows an example of the status for i ve dei ned
heat pumps.
Status heat pump
ID Product Status
A1 EcoPart On, DHW
A2 EcoPart On, DHW
A3 EcoAir On, heating
A4 EcoAir Defrost
A5 EcoAir Off, ready to start
Select ID and OK for HP start
EcoPart EcoAir = CTC EcoAir 400
EcoAirM= CTC EcoAir 500