Enertech CTC EcoLogic Family series, Installation And Maintenance Manual, Page: 56 / 128

56
CTC EcoLogic Pro/Family
For the property owner
1
2
K24
K24
Example in which "Heating mode" is normally "On" in the
heating season, but when terminal block K24 is closed "Off"
is activated and the heating is switched off.
Heating System 1
Max. primary flow °C 55
Min. primary flow °C Off
Heating mode On
Heating mode, ext Off
Heating off, out °C 18
Heating off, time 120
Inclination °C 50
Adjustment °C 0
Night reduction disable ºC 0
Primary flow/room temp. reduced -3 / -3*
Alarm room temp. ºC 5
Radiator pump speed 100*
Smart low price ºC 1
Smart overcap. ºC 2
Anti Water Hammer No*
HP max DHW Yes*
Floor function mode Off/1/2/3
Floor function temp. ºC 25
Activate/select function.
When an input is assigned, the function must
be activated or set in the Settings menu.
In the example with remote controlled
"Heating, ext. mode", K24 is assigned. A
selection is then made of what is normal
mode (arrow 1).
Normal mode was selected here as:
Heating, mode (On)
When this has been done, you programme what is to
happen at Remote Control/Heating, external mode HS1
(closed input, arrow 2).
Arrow 2 indicates the selection "Off".
So in this example the heating is always on. (Normal
mode) The radiator pump is switched on continuously,
the mixing valve operates to maintain its "setpoint
value".
But when K24 is closed, the radiator pump stops and
the mixing valve closes. The heating remains switched
off until you choose to start heating up by opening K24.
Open terminal block = "On" (in this example)
Closed terminal block = "Off" (in this example)
*Individual function. This function is not present in all products.
NB: Enertech AB is NOT responsible for the required heat being produced if the remote control has blocked the heating over a long period.