EnerSys Alpha FXM HP 1100, Technical Manual

Page: 141 / 150

0170022-J0 Rev A Page 129
10.7.4 Upgrading the Module
Once a valid firmware file is uploaded and the File Info field displays, Ready to Start , click Start Firm -
ware Upgrade .
As the upgrade progresses, the Firmware Upgrade table updates with information about the upgrade.
The Last Upgrade Percent Complete counts up from 0%, and then Last Upgrade Remaining
Modules counts down (if there is more than one module being upgraded).
If there is more than one module being upgraded, the percent complete will show the total (100% will
be reached once all modules are upgraded) instead of a per-module completion.
Figure 69: Upgrade in Progress
The firmware upgrade can be stopped if necessary. If you press Stop Firmware Upgrade button the
controller finishes upgrading the current module so as not to leave it in a non-functional state. If multiple
modules are queued, the next module will not be upgraded.
If the upgrade fails on a module, the controller stops the upgrade and will not attempt to continue on
any further modules that have been queued.
Once the upgrade is finished, the
Last Upgrade Percent Complete displays 100% , and the Last
Upgrade Status displays Succeeded .