0170022-J0 Rev A
Page 91
10
Maintaining the Controller
When maintaining your controller always check for known issues within the readme file that ships with
your software. This section of the manual covers the following:
•
Ethernet communications
•
Working with alarms
•
Controller maintenance
•
Working with logs
•
User account maintenance
•
File maintenance
10.1
Ethernet Communications
By default, Ethernet port 1 on the controller is configured to acquire an IP address automatically, and
the Ethernet port 2 is configured to use a static IP address of 192.168.0.90. The LCD can be used to
view and configure the IP addresses that are being used on both Ethernet ports.
To view or configure the IP addresses:
1. From the LCD main dashboard click
Shortcut
, and then press
Ethernet
.
2. The LCD displays the IP address currently used on both Ethernet ports.
3. Click to highlight the row of the port you want to view or configure.
4. Press the arrow on the right-side of the screen and then LCD displays the menus:
Status
,
IPv4
Address
,
IPv6 Addresses
and
Configuration
.
To change the IP address settings:
5. Select the
Configuration
menu to highlight, then press the arrow on the right-side of the screen
to enter.
6. Select
Change Network Configuration
to highlight that row, and then click the arrow on the
right-side of the screen to start the wizard.
7. Enter the desired IPv4 settings using the
Previous
,
Next
and
Cancel
buttons.
If you are configuring a manual IPv4 address, you must supply all four values: address, subnet,
gateway and DNS server. If you do not know the DNS server address, you can set it to 0.0.0.0.
If you do not have a gateway address, it is common to substitute the number 1 for the last entry.
So, if your IP address is 192.168.0.90, then you can set your gateway to 192.168.0.2.
8. When complete, click
Finish
and the changes are applied.
9. Click the back arrow, on the upper-left side of the screen twice and go back to the
Ethernet
screen to confirm the new settings.
On the Ethernet screen, verify that the new IP address settings are in use.
Summary of Contents for Alpha FXM HP 1100
