0170022-J0 Rev A
Page 113
•
Upgrade
of the controller application software
•
Import
and
Export
of license key files
•
Upgrade
of module application software using ACAN files.
File operations that are available only via the LCD:
•
Backup
and
Restore
of the controller application software and configuration
•
Upgrade
of the controller operating system software
File operations that are available only via the Web:
•
Downloading
of event logs, module alerts, datalogs and tables
LCD Import and Export
On the LCD, go to
Menu > Controller > Advanced Functions > Configuration File
. The
Export
Controller Clone
command allows you to export the entire controller configuration to a connected USB
drive. The other options
Export System or ADIO
and
Export Partial
are not supported on the LCD.
The
Import
command allow you to import configuration files with limitations as noted below.
Alternatively, go to
Shortcuts > Browse USB
. Here you can select a configuration file to perform an
Import
.
NOTE
:
Using the
Import
command from the LCD has limitations. Importing a configuration file that is a
clone of a controller will always work. However, importing a configuration file that is for a system, an
ADIO or a partial configuration will only work if the import can be achieved unambiguously. For example,
if the import is intended to change some configuration for an ADIO, but there are more than one ADIO
of the same type it will be ambiguous as to which ADIO should receive the configuration. Therefore the
import will fail. In this scenario, the web should be used to do the import so that the user can choose
which ADIO should receive the configuration.
LCD Application Upgrade
There are two ways to upgrade the controller software:
1. On the LCD, go to
Menu > Controller > Advanced Functions > Controller Software Upgrade
.
The
Upgrade New Controller Software and Reboot
command will allow you to upgrade the
application using an appropriate upgrade (zip) file.
2. On the LCD go to
Shortcuts > Browse USB
. You can upgrade the controller application via an
appropriate upgrade (zip) file that has been stored on a USB drive.
The application upgrade takes several seconds. The controller reboots automatically when complete.
Operating System Upgrade
On the LCD, go to
Shortcuts > Browse USB
. You can upgrade the controller operating system via an
appropriate upgrade (zip) file that has been stored on a USB drive.
NOTE
:
There must be at least 33 MB of free space to run the Operating System upgrade. To check the
available Free Space, goto
Menu > Controller > Configure Controller > Storage and Memory >
Application Storage.
The operating system upgrade takes several minutes. The controller reboots automatically when the
upgrade completes.
Summary of Contents for Alpha FXM HP 1100
