EnerSys Alpha FXM HP 1100, Technical Manual

Page: 114 / 150

0170022-J0 Rev A Page 102
4. To change which system displays in the left most area of the system status bar, click edit for 1st
system, and then select an option from the drop-down menu.
5. Continue to assign systems to the 2nd, 3rd, and 4th slots as required.
The system status bar displays the selected systems in the order selected.
10.3.8 Changing the Dashboard Values
It is possible to change the values that show for a system on the System Status Bar , the LCD Dash -
board , and the Web UI Dashboard .
To change which values appear for a system:
1. Go to
Controller > User Interface Preferences
.
2. Look at the table for the system you wish to configure (for example, DC System 48V Dashboard
Values).
3. Click the edit icon beside the
Dashboard Value
you would like to edit.
NOTE
: The values in this table will appear on the different dashboards in the order they appear in this
table (for example, Dashboard Value 1 , then Dashboard Value 2 , etc.). To change the order, set the
fields in this table in the desired order.
4. Select the value to show for this
Dashboard Value
, then click
Save
.
The new value selected will appear in the position of the
Dashboard Value
that was configured.
10.3.9 Data Sharing
The Data Sharing feature allows some data to be shared between controllers. This data sharing feature
consists of two parts:
• Published Data
• Data Subscriptions
Data sharing can be useful in situations where systems were installed at different times. These systems
may have different controllers, but share the same bus (for example, a DC System was installed, then
later-on, an AMPS System was installed, each with their own controllers).