Endress+Hauser SpectraSensors OXY5500, Operating Instruction

Page: 53 / 146

BA02195C OXY5500 Optical Oxygen Analyzer
Hauser 4
–
23
recommends 35 days as a starting point for re-calibration or as the application
requires it. Refer to Table 4–2 below and “Calibrating the analyzer” on page
4 - 35.
Logging and data management
On the MEASUREMENT SETTINGS screen, use the navigation buttons to move
to the Logging box. Refer to Figure 4–25.
•
Select Off if you do not want to store measurement data.
•
Select On to store measurement data.
The screen will switch to the Measurement Browser automatically. A
list will display showing the Measurement file name, the number of
measurement Points stored in the respective file and the date the file
was Last Used . Refer to Figure 4–26.
Table 4–2 Interval sampling rate/calibration frequency
Sampling Rate Points
Calibration
Frequency (Days)
30 seconds 100,000 34.7
1 minute 100,000 69.4
1 hour 100,000 4,166
10 hours 100,000 41,666
In the Status bar, the symbol indicates Logging is turned
off as shown in Figure 4–25.
Figure 4–25 Measurement settings screen -
Logging