Prosonic S FMU95 PROFIBUS DP
Commissioning
Hauser
55
Configuration of the display format
1. Navigate to the parameter set:
Display → Display format
.
2. In the
Format
parameter, select the number format for length data.
3. In the
No. of decimals
parameter, specify the number of decimal places that are
displayed.
4. In the
Sep. character
parameter, specify whether a comma or dot is used as the
decimal separator.
5. In the
Customized text
parameter, specify whether
Customized text 1
to
Customized text N
(see above) is used and displayed on the screen.
Configuration of back to home time
1. Navigate to
Display → Back to home → Back to home
2. Specify the time after which the onsite display returns to home (measured value
display).
9.4.2
Configuration of the DI Blocks
Parameter set
Output/calculat. → Digital input → Digital input N
Parameter
•
Allocation
Select the switching state that is output as a binary signal via the DI Block.
•
Relay
Connects the DI Block with one of the device relays.
Once this option has been selected, the
Relay
function is displayed where you can
select the relay.
•
Pump control
Only displayed if pump control has been configured.
Connects the DI Block with a pump control relay.
•
Rake control
Only displayed if rake control has been configured.
Connects the DI Block with a rake control relay.
•
None
•
Value
Indicates the current switching state of the relay.
•
Status
Displays the status that is transmitted together with the binary value.
9.4.3
Configuration of the AI Blocks
Parameter set
Output/calculat. → Analog input → Analog input N
Parameter
•
Measured value N
Select the measured variable which is output via the AI Block.
•
Value
Displays the current value of the selected measured variable.
•
Status
Displays the status that is transmitted with the value.
