Endress+Hauser Analytik Jena CyBio FeliX, Operating Instructions Manual, Page: 91 / 116

Rev. B 2022/02 77
CyBio FeliX Maintenance & Care
8.2.1 Overview
Table 20: Maintenance overview
8.3 Maintenance/testing/cleaning -
Instructions
The scope of the safety labeling (as a mandatory component of accident prevention mea-
sures) is shown in the chapter → „Safety markings” on page 9 .
Maintenance task Maintenance intervals
Weekly
Monthly Every
six
months
→ „Cleaning the basic unit (including
decks)” on page 79
x
Replace used tips
when needed
or at least once
a week
Empty the tip waste system*
and clean it
when needed
or at least once
a week
Clean all liquid-holding vessels* and the
outside of tubes * with disinfectant
x
→ „Service the head mount” on page 80
x
→
„Cleaning cones” on page 80
X
→ „Check/replace the O-rings” on
page 81 *
x
→
„Check the function of the louver” on
page 83
1
x
Perform a precision test
(see separate instructions)
x
Perform a leak test
(see separate instructions)
x
Check electrical components and cabling,
test grounding (PE) conductor (only quali-
fied electrician!)
x
1 Does not apply to the version without enclosure/louver (e.g. 30-5015-500-24).
TIP
When working on the device or on accessories it is recommended to wear personal pro-
tective
equipment (PPE).
The exterior of the device and any control elements located on the exterior must
not be touched with gloves which were used for working on the device interior and
which may have been contaminated
during this work!