manualshive.com logo in svg

Endress+Hauser Analytik Jena CyBio FeliX, Operating Instructions Manual, Page: 13 / 116

Share
Download
Endress+Hauser Analytik Jena CyBio FeliX Operating Instructions Manual Download Page 13

Rev. B  2022/02

XIII

 CyBio FeliX

Table of Figures

Fig. 1:  Certification mark on the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

Fig. 2:  Warning signs on the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15

Fig. 3:  Warning sign on pipetting head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15

Fig. 4:  Danger areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16

Fig. 5:  Version with louver/enclosure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25

Fig. 6:  Version without louver/enclosure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26

Fig. 7:  Type plate for the version with enclosure/louver . . . . . . . . . . . . . . . . . . . . . . . .  27

Fig. 8:  Type plate for the version without enclosure/louver  . . . . . . . . . . . . . . . . . . . . .  27

Fig. 9:  Deck positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28

Fig. 10:  Heights – deck A, B and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  29

Fig. 11:  Heights – deck A, B and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30

Fig. 12:  LED – Operating status indicator/ Arrow keys  . . . . . . . . . . . . . . . . . . . . . . . . .  31

Fig. 13:  LED – Operating status indicator/button  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32

Fig. 14:  Head mount  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Fig. 15:  Rear of the device (rear panel removed, fan marked) . . . . . . . . . . . . . . . . . . .  34

Fig. 16:  Connectors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35

Fig. 17:  Connectors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35

Fig. 18:  Power switch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Fig. 19:  Head mount (clamping lever swiveled forward) . . . . . . . . . . . . . . . . . . . . . . . .  50

Fig. 20:  Push on the pipetting head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50

Fig. 21:  Pipetting head ready for operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50

Fig. 22:  Pipetting head (fastened) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51

Fig. 23:  Take off the pipetting head  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51

Fig. 24:  Head retainer (clamping lever swiveled forward)  . . . . . . . . . . . . . . . . . . . . . .  51

Fig. 25:  Axes of motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52

Fig. 26:  Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Fig. 27:  Settings (Set tool information) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  58

Fig. 28:  Settings for depositing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  58

Fig. 29:  Component window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59

Fig. 30:  Attach transport lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59

Fig. 31:  Window: Positioning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  60

Fig. 32:  Interactive positioning for setting an offset  . . . . . . . . . . . . . . . . . . . . . . . . . . .  61

Fig. 33:  Component window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  62

Fig. 34:  Method for manual change  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  62

Fig. 35:  Component window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63

Fig. 36:  Example: Pick up CyBio RoboTipTray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63

Fig. 37:  Component window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  64

Fig. 38:  Example: Pick-up of CHOICE adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  64

Fig. 39:  Method Pick up pipette tips (example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  64

Fig. 40:  Component window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66

Fig. 41:  Example of setting down tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66

Fig. 42:  Depositing an LH adapter (if necessary with tips, make sure to use  

a suitable holder) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  66

Fig. 43:  Course of events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67

Fig. 44:  Course of events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  68

Fig. 45:  Fuses (2x) in the combination element at the rear of the device . . . . . . . . . .  72

Fig. 46:  Cover magazine (transport protection) attached . . . . . . . . . . . . . . . . . . . . . . .  79

Fig. 47:  Head mount  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Fig. 48:  Safety workbench incl. door monitoring set  . . . . . . . . . . . . . . . . . . . . . . . . . . .  96

Fig. 49:  Door monitoring set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  97

Fig. 50:  Safety workbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  98

Fig. 51:  Safety light curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  99

Fig. 52:  Pin assignment for the ESTOP IN connection . . . . . . . . . . . . . . . . . . . . . . . . . 102

Summary of Contents for Analytik Jena CyBio FeliX





















































































































Reviews:

No comments