Endress+Hauser Analytik Jena CyBio FeliX, Operating Instructions Manual, Page: 78 / 116

64 Rev. B 2022/02
Operation CyBio FeliX
Pick up pipette tips, liquid handling
and CHOICE adapters
The fitting of the LH and CHOICE adapters is done in the same way as the fitting of
CyBio RoboTipTrays – see
→
see Fig. 38 (Example for the parameter inputs).
When using LH adapters, the corresponding pipette tips must be included. For this pur-
pose, the corresponding CyBio-TipBox or the holder for 1000 μ l tips* is positioned on deck
A.
After picking up an adapter, the information about the pipette tips - attached to the
adapter picked up - must be set as follows:
1.
Select the command: “Setting tool info”
2. Make a selection under the appropriate adapter type. If an adapter without pipette
tips has been picked up, the "Tips" property "No add-on" must be selected.
The pipette tips are picked up from the box/rack using the "Load" command. This contains
all necessary input parameters
→
see Fig. 38 .
When selecting the pipette tips, note the compatibility with the LH adapter
→
page 65 .
Fig. 37: Component window
Fig. 38: Example: Pick-up of CHOICE adapters
Fig. 39: Method Pick up pipette tips (example)