manualshive.com logo in svg

Endress+Hauser Analytik Jena CyBio FeliX, Operating Instructions Manual, Page: 45 / 116

Share
Download
Endress+Hauser Analytik Jena CyBio FeliX Operating Instructions Manual Download Page 45

Rev. B  2022/02

31

 CyBio FeliX

Technical description

4.1.5

Operating status indicator

LED – Operating status indicator/

Arrow keys 

/

Fig. 12:

LED – Operating status indicator/ Arrow keys

The operating status indicator is located on the front panel of the device. This provides the 

operator with information about the current status of the device and is visible from the 

outside when the louver is closed.

Table 12:  Red/green LED

Table 13:  Yellow LED

Indicator

Comment

GREEN

1

The device is operational. 

It can be operated via the PC.

GREEN/FLASHING

Device is in operation and runs a procedure (specified 

by an external control).

RED

The device indicates that there is an error.

RED/FLASHING

Errors are signaled by red flashing codes 

→ 

 

„LED 

flashing – red” on page 73

.

1 Off: Lack of operational readiness is signaled.

Display

Comment

YELLOW

1

Louver open

2

1 OFF: Safety device closed.
2 Does not apply to the version without enclosure/louver (e.g. 30-5015-500-24).

Summary of Contents for Analytik Jena CyBio FeliX





















































































































Reviews:

No comments