Endress+Hauser Analytik Jena CyBio FeliX, Operating Instructions Manual, Page: 61 / 116

Rev. B 2022/02 47
CyBio FeliX Operation
7 Operation
7.1 Switching on (operational readiness)
1. Check that power cord is correctly connected to the line power supply point .
2. Check if the louver
1
is closed.
3. Switch the power switch (on the right device side) to position "I"
( → see Fig. 18 ).
4. Observe operating status indicator (LED):

Red (flashing/on continuously): An internal error is signaled
(Error analysis → „LED flashing – red” on page 73 ).

Green (on continuously): Completion of initialization - display of readiness for opera-
tion.
5. Make sure that the PC is correctly connected to the device, switched on and the con-
trol software is called up.
Fig. 18: Power switch

The unit is ready for operation (insert head if necessary) and it can be operated
by means of computer control.
1 Does not apply to the version without enclosure/louver (e.g. 30-5015-500-24).