ENCAD NovaJet 4, User Manual

Page: 93 / 200

Printing vector data 7-93
User's Guide
PRINTING
VECTOR DA
T
A
➪ ➪
➪ ➪
➪
To set the wait time
1 From the Main menu, press the arrow buttons to advance to the Printer
Setup menu, then press Select.
2 Press the arrow buttons to advance to the Wait Time option, then press
Select. The equals sign (=) blinks.
PRINTER SETUP
WAIT TIME=0:00
3 Press the arrow buttons to increment the minutes and seconds, then
press Select. The equals sign (=) stops blinking.
4 Press the Menu button to move back to the previous menu level.
Setting the ink limit (NJ4 only)
The printer uses a method for assigning an Ink Limit (advanced
option) to polygon fills and wide polylines without affecting the color
of your image. This helps prevent bleeding when printing on inexpen-
sive inkjet media. The default for this option is On. If you are using
high quality media, this option may not be needed and can be turned
off.
➪ ➪
➪ ➪ ➪
To turn off the ink limit
1 Follow the procedure for displaying advanced options, discussed earlier
in this chapter.
2 Press the arrow buttons to advance to the Printer Setup menu, and
press Select.
3 Press the down arrow to advance to the Ink Limit menu. Press Select,
the equals sign (=) blinks.
PRINTER SETUP
INK LIMIT=ON