ENCAD NovaJet 4, User Manual

Page: 153 / 200

Maintenance I-153
User's Guide
APPENDICES
3 Thoroughly wash rubber caps with distilled or RO water.
4 Flush out the steel tube and CPC fitting on the reservoir using the CPC
reservoir adapter. This adapter opens the valve on the reservoir’s tubing
connection. Then a syringe can be attached to the adapter and the ink
captured in the reservoir tube can be purged.
CPC Reservoir Adapter
5 Rinse reservoirs once more with RO water and allow to dry.
6 Put the reservoirs back in the left cover assembly in the reverse order in
which they were removed and reinsert the black foam support.
7 Have someone help you reinstall the left cover assembly on the printer. Do
not overtighten the three Phillips screws.
8 Reconnect each ink delivery line to the appropriate reservoir and open all
the tubing clamps.
9 Replace the top cover.
10 Ensure that the tubing clamps are open. Keeping the clamps closed for
long periods of time may cause the tubing to permanently crimp.
11 You are now ready to fill reservoirs with the new ink.
Installing new cartridges
Be sure the cartridges you are installing contain GO ink.
Prime, fill, and install the cartridges as described in Chapter 2.