ENCAD NovaJet 4, User Manual

Page: 25 / 200

User's Guide
Getting started 2-25
GETTING S
T
AR
TED
Using the takeup roll
The takeup roll allows unattended printing by automatically wind
printed media onto a core. When using this option, be sure that the
media sensor on the printer's right leg is not blocked.
➪ ➪
➪ ➪
➪
To use the takeup roll
1 In the Printer Setup menu, set the Roll option to TAKEUP. This disables
the cutter.
2 Install a core onto the takeup guides. Be sure that the core width matches
the width of the media you are using. If you are using 50" media, rotate
the adjustable roll guide 90
o
to push it past the printer's leg.
3 Fit the adjustable roll guide firmly into the core. Tighten the roll guide
using the thumbscrew.
4 Using the media advance button on the printer's display panel, advance
enough media to allow its leading edge to come to the center of the
takeup roll. Orient the media so it goes to the outside of the takeup roll.