ENCAD NovaJet 4, User Manual

Page: 91 / 200

Printing vector data 7-91
User's Guide
PRINTING
VECTOR DA
T
A
Making multiple prints
You can set the printer to print a specific number of vector files,
during printing, as long as there is data in the buffer. When the
Reprints option is set to 0, only one image at a time prints.
➪ ➪
➪ ➪
➪
To make multiple prints
1 From the Main menu, press the arrow buttons to advance to the Printer
Setup menu, then press Select. Be sure Advanced Options are selected.
MAIN MENU
PRINTER SETUP
2 Press the arrow buttons to advance to the # of Reprints option, then
press Select. The equals sign (=) blinks.
PRINTER SETUP
# OF REPRINTS=0
3 Press the arrow buttons to increment the number, then press Select. The
equals sign (=) stops blinking.
4 Press the Menu button to move back to the previous menu level.
Scaling the print area using the P1/P2 coordinates
When drafting by hand, the drafter sometimes superimposes on the
graph media a second grid, scaled to suit the drawing. If you have
selected the advanced options, you can similarly scale the print area
using the P1 and P2 coordinates.
P1 and P2 are the imaginary points located near the lower left and
upper right corners of the print area, when the print is not rotated.
Rotating the print causes the location of P1 and P2 to shift, relative to
their original positions. For all HP-GL emulations, P1 and P2 defaults
are located 0.6 inches inside the printing area (the Normal setting).