ENCAD NovaJet 4, User Manual

Page: 34 / 200

User's Guide
2-34 Getting started
3 Remove the cap from the pouring spout.
4 Remove the rubber cap on the reservoir you want to fill.
5 Verify that the ink color and the reservoir color match.
6 Pour the ink into the reservoir until it reaches the top level indicator on the
front of the reservoir. DO NOT OVERFILL. There will be some ink left in the
bottle. Replace the lid on the bottle and store the remaining ink.
7 Replace the rubber cap on the reservoir.
8 Repeat this procedure for the remaining colors.
Priming the ink delivery lines (NJP-36 and NJP-50 only)
You will need to prime each of the four ink delivery lines to establish an
ink siphon and bleed any air bubbles out of the lines before attaching the
cartridges. A priming pump with a black rubber tip is provided in the
NovaInk Tool Kit for this purpose. This procedure only needs to be done
the first time you set up the printer. It is not necessary when refilling the
reservoirs or replacing cartridges.