manualshive.com logo in svg

ENCAD NovaJet 4, User Manual

Share
Download
ENCAD NovaJet 4 User Manual Download Page 187

  Troubleshooting  J-187

User's Guide

APPENDICES

How do I send PostScript files?

When using the Microsoft Windows or AutoCAD drivers, set Printer
Setup/Lang to HP-GL/2. With this setting, the printer can accept all
RTL language files and all Windows and AutoCAD files. HP-GL or
HP-GL/2 files from applications other than Windows or AutoCAD
may require manually switching the language setting on the front
panel.

If you are using the printer with a network spooler, consider modify-
ing the spooler to automatically insert the PJL language-switching
commands at the beginning and end of each file. This lets the printer
switch automatically into the correct graphics language for your
current print and returns the printer to the front panel graphics lan-
guage setting for subsequent prints.

Windows driver

ENCAD’s Windows driver supports Windows versions 3.0 and 3.1. A
separate driver is available for Windows 95, but does not support
Windows NT. Use the HP-GL/2 driver provided with Windows NT.

Be sure you are using the latest driver. Check the ENCAD BBS or
Internet WEB page and download a new driver if necessary.

DO NOT use the ENCAD printer driver which Microsoft ships with
Windows 3.1, HPPRINT.DRV. It is an old HP-GL driver.

ADI driver for AutoCAD 12 and 13 for DOS

ENCAD’s ADI driver supports AutoCAD 12 and 13 for DOS only. If
using AutoCAD 12 for Windows, configure AutoCAD for the HP-
GL/2 driver and the 7600 color or HP650C model. If using AutoCAD
13 for Windows, check the ENCAD BBS or Internet WEB page and
download the driver.

Summary of Contents for NovaJet 4









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands