ENCAD NovaJet 4, User Manual

Page: 48 / 200

3-48 Setting printer options
User's Guide
Turning the wiper off
The cartridge jet plates are normally wiped each time the carriage enters
the service station during printing. The default for this function is ON.
However, if you are having problems with banding, you can sometimes
solve the problem by setting the wiper to OFF.
➪ ➪
➪ ➪ ➪
To turn off the wiper
1 From the Main menu, press the arrow buttons to advance to the Printer
Setup menu, then press Select.
2 Press the arrow buttons to advance to the Wiper option, then press Select.
The equals sign (=) blinks.
PRINTER SETUP
WIPER=ON
3 Press the arrow key to show OFF, then press Select. The equals sign (=)
stops blinking.
4 Press the Menu button to move back to the previous menu level.
Turning off Save Media
When the Save Media is On (the default), the media advances only as
far as needed to print the image. With the Save Media option turned off,
the printer advances the full print area of the loaded media. For example,
if a 36 inch roll is loaded, the printer advances the length of the print
area for an E size sheet (about 48 inches) even if the printed image is
only 30 inches long. For more information about the print areas of
different media sizes, see "Selecting the media size" in Chapter 5.