Emulex OneCommand Manager 5.0 User Manual Download Page 189 | Manualshive

Page: 189 / 223

background image

The OneCommand Utility User Manual

Page 182

Dump Commands

Caution: Disruption of service can occur if a diagnostic dump is run during I/O activity.

DeleteDumpFiles

Supported by: Windows, Solaris SFS, Linux and VMware ESX Server

Syntax: hbacmd DeleteDumpFiles <WWPN>

Description: Deletes all diagnostic dump files for the adapter.

Parameters:

WWPN - World Wide Port Name of the adapter whose diagnostic dump files you want to delete.

Dump

Supported by: Windows, Solaris SFS, Linux and VMware ESX Server.

Syntax: hbacmd dump <WWPN>

Description: Shows the maximum number of diagnostic dump files that be can stored for an adapter.
Creates a diagnostic dump file in the hbacmd dump file directory.

Parameters:

WWPN - World Wide Port Name of the adapter whose dump information you want to view.

GetDumpDirectory

Supported by: Windows, Solaris SFS, Linux and VMware ESX Server

Syntax: hbacmd GetDumpDirectory <WWPN>

Description: Shows the dump file directory associated with the adapter.

Parameters:

WWPN - World Wide Port Name of the adapter on which you want to view the dump directory.

GetRetentionCount

Supported by: Windows, Solaris SFS, Linux and VMware ESX Server

Syntax: hbacmd GetRetentionCount <WWPN>

Description: Shows the maximum number of diagnostic dump files stored for the adapter.

Parameters:

WWPN - World Wide Port Name of the adapter on which you want to get the retention count.

SetRetentionCount

Supported by: Windows, Solaris SFS, Linux and VMware ESX Server

Syntax: hbacmd SetRetentionCount <WWPN> <Value>

Note: The diagnostic dump feature enables you to create a “dump” file for a selected

adapter. Dump files contain various information such as firmware version, driver
version, and so on. This information is particularly useful when troubleshooting an
adapter. (Not available in read-only mode.)

Note: The dump directory applies to all adapters in the server. Each adapter does not have

a separate dump directory.

«
...
187
188
189
190
191
...
»

Summary of Contents for OneCommand Manager 5.0
































































































































































































































Reviews:

No comments

Related manuals for OneCommand Manager 5.0

Brand: Yamaha Pages: 43

LANDXPLORER 2011 - SYSTEM REQUIREMENTS

Brand: Autodesk Pages: 3

Brand: Arturia Pages: 10

Brand: MACROMEDIA Pages: 232

Brand: Sharp Pages: 12

Integrated Solution II

Brand: Lucent Technologies Pages: 177

Brand: Emagic Pages: 256

Brand: ADS Technologies Pages: 2

Brand: GRASS VALLEY Pages: 174

Digital Cameras

Brand: Nikon Pages: 51

Brand: UNIBLUE Pages: 3

IP DSLAM IDL-2400

Brand: Planet Pages: 707

PLATESPIN ORCHESTRATE 2.0.2 - HIGH AVAILABILITY CONFIGURATION GUIDE 06-17-2009

Brand: Novell Pages: 36

LINUX ENTERPRISE SERVER STARTER SYSTEM

Brand: Novell Pages: 54

LINUX ENTERPRISE SERVER 11 - VIRTUALIZATION

Brand: Novell Pages: 132

VBRICK APPLIANCE VB4000

Brand: VBrick Systems Pages: 124

PowerCore Master X3

Brand: TC Electronic Pages: 11

Brand: Omron Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands