The OneCommand Utility User Manual
Page 37
Removing Targets
To remove a target:
1.
Log out of all sessions for the target you want to remove.
2.
From the iSCSI Target Discovery dialog box, select the target you want to remove and click
Remove Target.
Viewing Target Sessions
The Target Sessions dialog box enables you to view active sessions for a currently connected target.
To view active sessions for a connected target:
1.
From the iSCSI Target Discovery dialog box, select the target whose sessions you want to view
and click Target Sessions. The Target Sessions dialog box appears.
If there are multiple active sessions in progress, use the Session pull-down menu to select the
session whose information you want to view. Click Close to close the dialog box.
Logging out of Target Sessions
The Target Sessions dialog box enables you to log out of active sessions for a currently connected
target.
To logout of active sessions for a connected target:
1.
From the iSCSI Target Discovery dialog box, select the target whose sessions you want to log
out of and click Target Sessions. The Target Sessions dialog box appears.
2.
From the Session pull-down menu, select the session from which you want to logout.
3.
Click Close Session to log out of the session.
Note: In cases where the target still exists on the network, the removed target(s) may
reappear as targets are periodically refreshed on the host system. Removing a target
permanently removes targets from the OneCommand Manager configuration only
after the target portal is removed from the OneCommand Manager configuration or
the target portal or target have been physically removed from the network.
Note: If all sessions are logged out, the target is disconnected and removed from the
discovery-tree.
