The OneCommand Utility User Manual
Page 117
•
status - This command is used to show the current status of the fcauthd daemon. The status
should be either running or stopped.
•
restart - The restart command performs a stop and then a start.
•
condrestart - The conditional restart command checks the status of the fcauthd daemon. If it is
running it issues a stop and then a start command. If the fcauthd daemon is not running nothing
happens.
The DHCHAP Tab
The DHCHAP tab enables you to configure authentication.
Figure 64: DHCHAP tab
DHCHAP Tab Field Definitions
•
Source - The WWPN of the adapter port.
•
Destination - The fabric (switch).
Configuration Area
•
Mode - The mode of operation. There are three modes: Enabled, Passive and Disabled.
•
Enabled - The adapter initiates authentication after issuing an FLOGI to the switch. If the
connecting device does not support DHCHAP authentication, the software still continues
with the rest of the initialization sequence.
•
Passive - The adapter does not initiate authentication, but participates in the authentication
process if the connecting device initiates an authentication request.
