The OneCommand Utility User Manual
Page 67
WWN Management Area
Current
•
WWPN - The World Wide Port Name for the selected adapter port.
•
WWNN - The World Wide Node Name for the selected adapter port.
Pending Changes
•
WWPN - Works in conjunction with the Change WWN button. Displays the World Wide Port
Name you assigned for the selected adapter port, but the system must be rebooted for these
changes to take effect and appear under the “Current” listing. See “Configuring Boot from SAN”
on page 134 for more information.
•
WWNN - Works in conjunction with the Change WWN button. Displays the World Wide Node
Name you assigned for the selected adapter port, but the system must be rebooted for these
changes to take effect and appear under the “Current” listing. See “Configuring Boot from SAN”
on page 134 for more information.
Maintenance Tab Buttons (Not available in read-only mode.)
•
Configure Boot - Click Configure Boot to configure boot from SAN. See “Configuring Boot from
SAN” on page 134 for more information. (Not available on VMware ESX servers being managed
through the CIM interface.)
•
Change WWN - Click to change the selected adapter port's World Wide Node Name or World
Wide Port Name. See “Changing World Wide Name Configuration (FC and FCoE Ports Only)”
on page 108 for more information. (Not available on VMware ESX servers being managed
through the CIM interface.)
Viewing OneConnect Adapter Firmware Information
Unlike Fibre Channel adapters, OneConnect adapter firmware is maintained on an adapter-specific
instead of port-specific basis.
To view iSCSI firmware information:
1.
Select Host view.
2.
Select a OneConnect adapter in the discovery-tree.
Note: Not supported on COMSTAR and VMware ESX servers being managed through the
CIM interface.
Note: iSCSI and NIC-Only adapters do not appear in Fabric view.