The OneCommand Utility User Manual
Page 23
To change management/read-only mode:
In Windows
1.
From the File menu, select Management Mode. The Management Mode dialog box appears.
Figure 5: Management Mode dialog box
2.
Choose the management type and read-only mode you want.
3.
Click OK.
In Solaris SFS
1.
Run the following script:
/opt/HBAnyware/set_operating_mode
2.
Choose the management type and read-only mode you want.
In Linux
1.
Stop the OneCommand Manager application.
2.
Run the following script:
/usr/sbin/hbanyware/set_operating_mode
3.
Choose the management type and read-only mode you want. Enter <y> for yes to allow the user
to perform these operations, enter <n> for no if read-only mode is desired.
Note: You must restart the OneCommand Manager application to see the new management
mode.